dmesg - Western Digital WD10EURX-73C
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-11-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu4) ) #17-Ubuntu SMP Tue Oct 1 19:42:04 UTC 2013 (Ubuntu 3.11.0-11.17-generic 3.11.3)
Command line: BOOT_IMAGE=/vmlinuz-3.11.0-11-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee1fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfee2000-0x00000000dfeeffff] ACPI data
BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. EP45-UD3R/EP45-UD3R, BIOS F12 01/25/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask F00000000 write-back
3 base 1C0000000 mask FC0000000 uncachable
4 base 1A0000000 mask FE0000000 uncachable
5 base 0DFF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 7GB, range: 1GB, type UC
reg 4, base: 6656MB, range: 512MB, type UC
reg 5, base: 3583MB, range: 1MB, type UC
total RAM covered: 6143M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3583MB, range: 1MB, type UC
reg 4, base: 4GB, range: 2GB, type WB
reg 5, base: 6GB, range: 512MB, type WB
e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5670-0x000f567f] mapped at [ffff8800000f5670]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x19fe00000-0x19fffffff]
[mem 0x19fe00000-0x19fffffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x19c000000-0x19fdfffff]
[mem 0x19c000000-0x19fdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x19bffffff]
[mem 0x180000000-0x19bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfedffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfedffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
RAMDISK: [mem 0x35d70000-0x36eaffff]
ACPI: RSDP 00000000000f7070 00014 (v00 GBT )
ACPI: RSDT 00000000dfee2040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000dfee2180 04C5A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfee0000 00040
ACPI: HPET 00000000dfee6f40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000dfee6fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000dfee7000 004D0 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000dfee74d0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
ACPI: APIC 00000000dfee6e40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000019fffffff]
Initmem setup node 0 [mem 0x00000000-0x19fffffff]
NODE_DATA [mem 0x19fff7000-0x19fffbfff]
[ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199600000-ffff88019f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x19fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdfedffff]
node 0: [mem 0x100000000-0x19fffffff]
On node 0 totalpages: 1572478
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14268 pages used for memmap
DMA32 zone: 913120 pages, LIFO batch:31
Normal zone: 10240 pages used for memmap
Normal zone: 655360 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfee0000-0xdfee1fff]
PM: Registered nosave memory: [mem 0xdfee2000-0xdfeeffff]
PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
PM: Registered nosave memory: [mem 0xdff00000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdff00000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88019fc00000 s86656 r8192 d23936 u524288
pcpu-alloc: s86656 r8192 d23936 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1547885
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-11-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6090760K/6289912K available (7195K kernel code, 1091K rwdata, 3288K rodata, 1368K init, 1488K bss, 199152K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2396.822 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4793.64 BogoMIPS (lpj=9587288)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e68000 - ffffffff81e6f000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27910 entries in 110 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19174.57 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee1fff] (8192 bytes)
regulator-dummy: no parameters
RTC time: 4:25:33, date: 10/09/13
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x32, should be 0x31 (20130517/tbprint-204)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff]
pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: reg 0x24: [io 0xf800-0xf80f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfdffd000-0xfdffd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 0x14: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 0x18: [io 0xf400-0xf407]
pci 0000:00:1f.5: reg 0x1c: [io 0xf300-0xf303]
pci 0000:00:1f.5: reg 0x20: [io 0xf200-0xf20f]
pci 0000:00:1f.5: reg 0x24: [io 0xf100-0xf10f]
pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xfddfe000-0xfddfffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:04:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:05:07.0: [104c:8024] type 00 class 0x0c0010
pci 0000:05:07.0: reg 0x10: [mem 0xfdcff000-0xfdcff7ff]
pci 0000:05:07.0: reg 0x14: [mem 0xfdcf8000-0xfdcfbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:09: [io 0x0400-0x04cf] could not be reserved
system 00:09: [io 0x04d2-0x04ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x000cdc00-0x000cffff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17664K (ffff880035d70000 - ffff880036eb0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8800dbee0000-ffff8800dfedffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1381292733.516:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 11930
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 4 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-11-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-11-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-11-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: de7e102d661599083c73333a6ca5a6d79de3caa1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 1:496:413
rtc_cmos 00:03: setting system clock to 2013-10-09 04:25:34 UTC (1381292734)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 1-3: New USB device found, idVendor=050d, idProduct=945a
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Basic Wireless USB Adapter
usb 1-3: Manufacturer: Manufacturer Realtek
usb 1-3: SerialNumber: 00e04c000001
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: WDC WD10EURX-73C57Y0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: HPA detected: current 976771055, native 976773168
ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD10EURX-73C 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.01: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1368K (ffffffff81d12000 - ffffffff81e68000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 984K (ffff88000170a000 - ffff880001800000)
Freeing unused kernel memory: 808K (ffff880001b36000 - ffff880001c00000)
usb 2-1: New USB device found, idVendor=058f, idProduct=6362
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 058F312D81B
systemd-udevd[125]: starting version 204
libahci: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:03:00.0: version 3.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168c/8111c at 0xffffc90000c62000, 00:1f:d0:9b:2a:88, XID 1c4000c0 IRQ 44
r8169 0000:04:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi5 : ahci
scsi6 : ahci
ata5: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19
ata6: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi7 : pata_jmicron
scsi8 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 3-2: new low-speed USB device number 2 using uhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 3-2: New USB device found, idVendor=060b, idProduct=6220
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB KEYBOARD
usb 3-2: Manufacturer: NOVATEK
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
hid-generic 0003:060B:6220.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB KEYBOARD] on usb-0000:00:1a.0-2/input0
input: NOVATEK USB KEYBOARD as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
hid-generic 0003:060B:6220.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB KEYBOARD] on usb-0000:00:1a.0-2/input1
bio: create slab at 1
firewire_core 0000:05:07.0: created device fw0: GUID 007af1a600001fd0, S400
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:1: Attached scsi generic sg4 type 0
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
sd 4:0:0:0: [sdc] Attached SCSI removable disk
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 4191228k swap on /dev/sdb5. Priority:-1 extents:1 across:4191228k FS
Adding 8384508k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8384508k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[326]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[drm] Initialized drm 1.1.0 20060810
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
ip_tables: (C) 2000-2006 Netfilter Core Team
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: Staging version
r8712u: register rtl8712_netdev_ops to netdev_ops
usb 1-3: r8712u: USB_SPEED_HIGH with 4 endpoints
usb 1-3: r8712u: Boot from EFUSE: Autoload OK
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
usb 1-3: r8712u: CustomerID = 0x0000
usb 1-3: r8712u: MAC Address from efuse = 94:44:52:ef:b0:77
usb 1-3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
type=1400 audit(1381292749.730:2): apparmor="STATUS" operation="profile_load" parent=524 profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:3): apparmor="STATUS" operation="profile_load" parent=524 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:4): apparmor="STATUS" operation="profile_load" parent=524 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:5): apparmor="STATUS" operation="profile_replace" parent=524 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:6): apparmor="STATUS" operation="profile_replace" parent=524 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:7): apparmor="STATUS" operation="profile_replace" parent=524 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
type=1400 audit(1381292749.730:8): apparmor="STATUS" operation="profile_replace" parent=478 profile="unconfined" name="/sbin/dhclient" pid=481 comm="apparmor_parser"
type=1400 audit(1381292749.730:9): apparmor="STATUS" operation="profile_replace" parent=478 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
type=1400 audit(1381292749.730:10): apparmor="STATUS" operation="profile_replace" parent=478 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
type=1400 audit(1381292749.730:11): apparmor="STATUS" operation="profile_replace" parent=478 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ip6_tables: (C) 2000-2006 Netfilter Core Team
ppdev: user-space parallel port driver
gpio_ich: GPIO from 195 to 255 on gpio_ich
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (676) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (619) killed by TERM signal
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
audit_printk_skb: 15 callbacks suppressed
type=1400 audit(1381292755.890:17): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/sbin/dhclient" pid=863 comm="apparmor_parser"
type=1400 audit(1381292755.890:18): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
type=1400 audit(1381292755.890:19): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
type=1400 audit(1381292755.890:20): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
type=1400 audit(1381292755.890:21): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
type=1400 audit(1381292755.890:22): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
type=1400 audit(1381292756.530:23): apparmor="STATUS" operation="profile_load" parent=855 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=861 comm="apparmor_parser"
type=1400 audit(1381292756.530:24): apparmor="STATUS" operation="profile_load" parent=855 profile="unconfined" name="chromium_browser" pid=861 comm="apparmor_parser"
type=1400 audit(1381292756.530:25): apparmor="STATUS" operation="profile_replace" parent=855 profile="unconfined" name="chromium_browser" pid=861 comm="apparmor_parser"
type=1400 audit(1381292756.530:26): apparmor="STATUS" operation="profile_load" parent=855 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=862 comm="apparmor_parser"
init: nvidia-persistenced main process (1056) terminated with status 1
cfg80211: Calling CRDA to update world regulatory domain
r8712u 1-3:1.0 wlan0: 1 RCR=0x153f00e
r8712u 1-3:1.0 wlan0: 2 RCR=0x553f00e
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: udev-fallback-graphics main process (1228) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-splash main process (1250) terminated with status 1
nvidia 0000:01:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8712u 1-3:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:c8:46:20, seq = 32, tid = 0
r8712u 1-3:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:c8:46:20, seq = 1312, tid = 0
r8712u 1-3:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:c8:46:20, seq = 2528, tid = 0
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
r8712u 1-3:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:c8:46:20, seq = 7472, tid = 0
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
perf samples too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=94:44:52:ef:b0:77:00:1d:d2:c8:46:21:08:00 SRC=10.0.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2